How To Fix Brother Printer Paper jam? Get Troubleshoot Now.

How To Fix Brother Printer Paper jam? Get Troubleshoot Now.

To clear the Brother Printer Paper Jam error message Paper Jam after you removed the jammed paper, please open and close the scanner cover.
If you still receive the error message, a small piece of paper may be stuck inside your Brother machine.

Brother Printer Paper Jam

Important Step to follow on how to remove any ripped paper remaining inside your Brother machine.

  1. Using both hands, grasp the plastic tabs on both sides of the machine and lift the scanner cover (1) to the open position

2. Check the position of the print head.

  • If you found the print head at the left hand side or center of the platen area, go to STEP 3.
  • If the print head is in the right corner as shown in the illustration below, hold down Stop/Exit until the print head moves to the center.

3. Unplug your Brother machine from the AC power outlet (electrical socket).

4. Gently move the print head using your fingers to take out any paper remaining in this area. To remove the small pieces of paper, you can use a pair of tweezers.

5. Using both hands, grasp the plastic tabs on both sides of the machine and gently close the scanner cover.

6. Plug the power cord back into the AC power outlet (electrical socket).

Remove the paper jammed inside the machine
Follow the steps below to clear the paper jam inside the machine.

  1. Unplug your Brother machine from the AC power outlet (electrical socket).
  2. Using both hands, open the scanner cover and remove the Disc Tray.
  3. If the paper support flap is open, close it, and then close the paper support. Pull the paper tray completely out of the machine.
  4. Open the Disc Guide.
  5. Using both hands, grasp the plastic tabs on both sides of the machine and lift the scanner cover (1) to the open position.
  6. Make sure that jammed paper is not left in the corners of the machine.
  7. Make sure that all the jammed paper has been removed from the Disc Guide
  • If the jammed paper in the Disc Guide cannot be removed, go to STEP 7.
  • If the jammed paper in the Disc Guide can be removed, go to STEP 10.


7. Insert the Disc Tray into the Disc Guide

8. Insert the Disc Tray into the Disc Guide

9. Remove the Disc Tray from the Disc Guide.

10. Close the Disc Guide

11. Using both hands, grasp the plastic tabs on both sides of the machine and gently close the scanner cover

12. Push the paper tray firmly back into the machine

13. Store the Disc Tray back in the scanner cover

14. While holding the paper tray in place, pull out the paper support until it clicks, and then unfold the paper support flap.

15. Make sure you pull out the paper support until it clicks.

16. Plug the power cord back into the AC power outlet (electrical socket).


Problems Fixed. If Still Facing Brother Printer Paper Jam Issue then contact our support desk.

Leave a Reply

Your email address will not be published. Required fields are marked *